verde.Spline¶

class
verde.
Spline
(mindist=1e05, damping=None, force_coords=None, engine='auto')[source]¶ Biharmonic spline interpolation using Green’s functions.
This gridder assumes Cartesian coordinates.
Implements the 2D splines of [Sandwell1987]. The Green’s function for the spline corresponds to the elastic deflection of a thin sheet subject to a vertical force. For an observation point at the origin and a force at the coordinates given by the vector \(\mathbf{x}\), the Green’s function is:
\[g(\mathbf{x}) = \\mathbf{x}\^2 \left(\log \\mathbf{x}\  1\right)\]In practice, this function is not defined for data points that coincide with a force. To prevent this, a fudge factor is added to \(\\mathbf{x}\\).
The interpolation is performed by estimating forces that produce deflections that fit the observed data (using leastsquares). Then, the interpolated points can be evaluated at any location.
By default, the forces will be placed at the same points as the input data given to
fit
. This configuration provides an exact solution on top of the data points. However, this solution can be unstable for certain configurations of data points.Approximate (and more stable) solutions can be obtained by applying damping regularization to smooth the estimated forces (and interpolated values) or by not using the data coordinates to position the forces (use the force_coords parameter).
Data weights can be used during fitting but only have an any effect when using the approximate solutions.
Before fitting, the Jacobian (design, sensitivity, feature, etc) matrix for the spline is normalized using
sklearn.preprocessing.StandardScaler
without centering the mean so that the transformation can be undone in the estimated forces.Parameters:  mindist : float
A minimum distance between the point forces and data points. Needed because the Green’s functions are singular when forces and data points coincide. Acts as a fudge factor.
 damping : None or float
The positive damping regularization parameter. Controls how much smoothness is imposed on the estimated forces. If None, no regularization is used.
 force_coords : None or tuple of arrays
The easting and northing coordinates of the point forces. If None (default), then will be set to the data coordinates used to fit the spline.
 engine : str
Computation engine for the Jacobian matrix and prediction. Can be
'auto'
,'numba'
, or'numpy'
. If'auto'
, will use numba if it is installed or numpy otherwise. The numba version is multithreaded and usually faster, which makes fitting and predicting faster.
See also
SplineCV
 Crossvalidated version of the biharmonic spline
Attributes:  force_ : array
The estimated forces that fit the observed data.
 force_coords_ : tuple of arrays
The easting and northing coordinates of the point forces. Same as force_coords if it is not None. Otherwise, same as the data locations used to fit the spline.
 region_ : tuple
The boundaries (
[W, E, S, N]
) of the data used to fit the interpolator. Used as the default region for thegrid
andscatter
methods.
Methods
filter
(self, coordinates, data[, weights])Filter the data through the gridder and produce residuals. fit
(self, coordinates, data[, weights])Fit the biharmonic spline to the given data. get_params
(self[, deep])Get parameters for this estimator. grid
(self[, region, shape, spacing, dims, …])Interpolate the data onto a regular grid. jacobian
(self, coordinates, force_coords[, …])Make the Jacobian matrix for the 2D biharmonic spline. predict
(self, coordinates)Evaluate the estimated spline on the given set of points. profile
(self, point1, point2, size[, dims, …])Interpolate data along a profile between two points. scatter
(self[, region, size, random_state, …])Interpolate values onto a random scatter of points. score
(self, coordinates, data[, weights])Score the gridder predictions against the given data. set_params
(self, \*\*params)Set the parameters of this estimator.
Examples using verde.Spline
¶

Spline.
filter
(self, coordinates, data, weights=None)¶ Filter the data through the gridder and produce residuals.
Calls
fit
on the data, evaluates the residuals (data  predicted data), and returns the coordinates, residuals, and weights.No very useful by itself but this interface makes gridders compatible with other processing operations and is used by
verde.Chain
to join them together (for example, so you can fit a spline on the residuals of a trend).Parameters:  coordinates : tuple of arrays
Arrays with the coordinates of each data point. Should be in the following order: (easting, northing, vertical, …).
 data : array or tuple of arrays
The data values of each data point. If the data has more than one component, data must be a tuple of arrays (one for each component).
 weights : None or array or tuple of arrays
If not None, then the weights assigned to each data point. If more than one data component is provided, you must provide a weights array for each data component (if not None).
Returns:  coordinates, residuals, weights
The coordinates and weights are same as the input. Residuals are the input data minus the predicted data.

Spline.
fit
(self, coordinates, data, weights=None)[source]¶ Fit the biharmonic spline to the given data.
The data region is captured and used as default for the
grid
andscatter
methods.All input arrays must have the same shape.
Parameters:  coordinates : tuple of arrays
Arrays with the coordinates of each data point. Should be in the following order: (easting, northing, vertical, …). Only easting and northing will be used, all subsequent coordinates will be ignored.
 data : array
The data values of each data point.
 weights : None or array
If not None, then the weights assigned to each data point. Typically, this should be 1 over the data uncertainty squared.
Returns:  self
Returns this estimator instance for chaining operations.

Spline.
get_params
(self, deep=True)¶ Get parameters for this estimator.
Parameters:  deep : boolean, optional
If True, will return the parameters for this estimator and contained subobjects that are estimators.
Returns:  params : mapping of string to any
Parameter names mapped to their values.

Spline.
grid
(self, region=None, shape=None, spacing=None, dims=None, data_names=None, projection=None, **kwargs)¶ Interpolate the data onto a regular grid.
The grid can be specified by either the number of points in each dimension (the shape) or by the grid node spacing. See
verde.grid_coordinates
for details. Other arguments forverde.grid_coordinates
can be passed as extra keyword arguments (kwargs
) to this method.If the interpolator collected the input data region, then it will be used if
region=None
. Otherwise, you must specify the grid region.Use the dims and data_names arguments to set custom names for the dimensions and the data field(s) in the output
xarray.Dataset
. Default names will be provided if none are given.Parameters:  region : list = [W, E, S, N]
The boundaries of a given region in Cartesian or geographic coordinates.
 shape : tuple = (n_north, n_east) or None
The number of points in the SouthNorth and WestEast directions, respectively.
 spacing : tuple = (s_north, s_east) or None
The grid spacing in the SouthNorth and WestEast directions, respectively.
 dims : list or None
The names of the northing and easting data dimensions, respectively, in the output grid. Defaults to
['northing', 'easting']
. NOTE: This is an exception to the “easting” then “northing” pattern but is required for compatibility with xarray. data_names : list of None
The name(s) of the data variables in the output grid. Defaults to
['scalars']
for scalar data,['east_component', 'north_component']
for 2D vector data, and['east_component', 'north_component', 'vertical_component']
for 3D vector data. projection : callable or None
If not None, then should be a callable object
projection(easting, northing) > (proj_easting, proj_northing)
that takes in easting and northing coordinate arrays and returns projected northing and easting coordinate arrays. This function will be used to project the generated grid coordinates before passing them intopredict
. For example, you can use this to generate a geographic grid from a Cartesian gridder.
Returns:  grid : xarray.Dataset
The interpolated grid. Metadata about the interpolator is written to the
attrs
attribute.
See also
verde.grid_coordinates
 Generate the coordinate values for the grid.

Spline.
jacobian
(self, coordinates, force_coords, dtype='float64')[source]¶ Make the Jacobian matrix for the 2D biharmonic spline.
Each column of the Jacobian is the Green’s function for a single force evaluated on all observation points [Sandwell1987].
Parameters:  coordinates : tuple of arrays
Arrays with the coordinates of each data point. Should be in the following order: (easting, northing, vertical, …). Only easting and northing will be used, all subsequent coordinates will be ignored.
 force_coords : tuple of arrays
Arrays with the coordinates for the forces. Should be in the same order as the coordinate arrays.
 dtype : str or numpy dtype
The type of the Jacobian array.
Returns:  jacobian : 2D array
The (n_data, n_forces) Jacobian matrix.

Spline.
predict
(self, coordinates)[source]¶ Evaluate the estimated spline on the given set of points.
Requires a fitted estimator (see
fit
).Parameters:  coordinates : tuple of arrays
Arrays with the coordinates of each data point. Should be in the following order: (easting, northing, vertical, …). Only easting and northing will be used, all subsequent coordinates will be ignored.
Returns:  data : array
The data values evaluated on the given points.

Spline.
profile
(self, point1, point2, size, dims=None, data_names=None, projection=None, **kwargs)¶ Interpolate data along a profile between two points.
Generates the profile along a straight line assuming Cartesian distances. Point coordinates are generated by
verde.profile_coordinates
. Other arguments for this function can be passed as extra keyword arguments (kwargs
) to this method.Use the dims and data_names arguments to set custom names for the dimensions and the data field(s) in the output
pandas.DataFrame
. Default names are provided.Includes the calculated Cartesian distance from point1 for each data point in the profile.
Parameters:  point1 : tuple
The easting and northing coordinates, respectively, of the first point.
 point2 : tuple
The easting and northing coordinates, respectively, of the second point.
 size : int
The number of points to generate.
 dims : list or None
The names of the northing and easting data dimensions, respectively, in the output dataframe. Defaults to
['northing', 'easting']
. NOTE: This is an exception to the “easting” then “northing” pattern but is required for compatibility with xarray. data_names : list of None
The name(s) of the data variables in the output dataframe. Defaults to
['scalars']
for scalar data,['east_component', 'north_component']
for 2D vector data, and['east_component', 'north_component', 'vertical_component']
for 3D vector data. projection : callable or None
If not None, then should be a callable object
projection(easting, northing) > (proj_easting, proj_northing)
that takes in easting and northing coordinate arrays and returns projected northing and easting coordinate arrays. This function will be used to project the generated profile coordinates before passing them intopredict
. For example, you can use this to generate a geographic profile from a Cartesian gridder.
Returns:  table : pandas.DataFrame
The interpolated values along the profile.

Spline.
scatter
(self, region=None, size=300, random_state=0, dims=None, data_names=None, projection=None, **kwargs)¶ Interpolate values onto a random scatter of points.
Point coordinates are generated by
verde.scatter_points
. Other arguments for this function can be passed as extra keyword arguments (kwargs
) to this method.If the interpolator collected the input data region, then it will be used if
region=None
. Otherwise, you must specify the grid region.Use the dims and data_names arguments to set custom names for the dimensions and the data field(s) in the output
pandas.DataFrame
. Default names are provided.Parameters:  region : list = [W, E, S, N]
The boundaries of a given region in Cartesian or geographic coordinates.
 size : int
The number of points to generate.
 random_state : numpy.random.RandomState or an int seed
A random number generator used to define the state of the random permutations. Use a fixed seed to make sure computations are reproducible. Use
None
to choose a seed automatically (resulting in different numbers with each run). dims : list or None
The names of the northing and easting data dimensions, respectively, in the output dataframe. Defaults to
['northing', 'easting']
. NOTE: This is an exception to the “easting” then “northing” pattern but is required for compatibility with xarray. data_names : list of None
The name(s) of the data variables in the output dataframe. Defaults to
['scalars']
for scalar data,['east_component', 'north_component']
for 2D vector data, and['east_component', 'north_component', 'vertical_component']
for 3D vector data. projection : callable or None
If not None, then should be a callable object
projection(easting, northing) > (proj_easting, proj_northing)
that takes in easting and northing coordinate arrays and returns projected northing and easting coordinate arrays. This function will be used to project the generated scatter coordinates before passing them intopredict
. For example, you can use this to generate a geographic scatter from a Cartesian gridder.
Returns:  table : pandas.DataFrame
The interpolated values on a random set of points.

Spline.
score
(self, coordinates, data, weights=None)¶ Score the gridder predictions against the given data.
Calculates the R^2 coefficient of determination of between the predicted values and the given data values. A maximum score of 1 means a perfect fit. The score can be negative.
If the data has more than 1 component, the scores of each component will be averaged.
Parameters:  coordinates : tuple of arrays
Arrays with the coordinates of each data point. Should be in the following order: (easting, northing, vertical, …).
 data : array or tuple of arrays
The data values of each data point. If the data has more than one component, data must be a tuple of arrays (one for each component).
 weights : None or array or tuple of arrays
If not None, then the weights assigned to each data point. If more than one data component is provided, you must provide a weights array for each data component (if not None).
Returns:  score : float
The R^2 score

Spline.
set_params
(self, **params)¶ Set the parameters of this estimator.
The method works on simple estimators as well as on nested objects (such as pipelines). The latter have parameters of the form
<component>__<parameter>
so that it’s possible to update each component of a nested object.Returns:  self