verde.SplineCV¶

class
verde.
SplineCV
(mindists=(1000.0, 10000.0, 100000.0), dampings=(1e10, 1e05, 0.1), force_coords=None, engine='auto', cv=None, client=None, delayed=False)[source]¶ Crossvalidated biharmonic spline interpolation.
Similar to
verde.Spline
but automatically chooses the best damping and mindist parameters using crossvalidation. Tests all combinations of the given dampings and mindists and selects the maximum (or minimum) mean crossvalidation score (i.e., a grid search).This can optionally run in parallel using
dask
. To do this, usedelayed=True
to dispatch computations withdask.delayed
. In this case, each fit and score operation of the grid search will be performed in parallel.Note
When using delayed, the
scores_
attribute will bedask.delayed
objects instead of the actual scores. This is because the scores are an intermediate step in the computations and their results are not stored. If you need the scores, rundask.compute
onscores_
to calculate them. Be warned that this will run the grid search again. It might still be faster than serial execution but not necessarily.Warning
The
client
parameter is deprecated and will be removed in Verde v2.0.0. Usedelayed
instead.Other crossvalidation generators from
sklearn.model_selection
can be used by passing them through the cv argument. Parameters
mindists (iterable or 1d array) – List (or other iterable) of mindist parameter values to try. Can be considered a minimum distance between the point forces and data points. Needed because the Green’s functions are singular when forces and data points coincide. Acts as a fudge factor.
dampings (iterable or 1d array) – List (or other iterable) of damping parameter values to try. Is the positive damping regularization parameter. Controls how much smoothness is imposed on the estimated forces. If None, no regularization is used.
force_coords (None or tuple of arrays) – The easting and northing coordinates of the point forces. If None (default), then will be set to the data coordinates the first time
fit
is called.engine (str) – Computation engine for the Jacobian matrix and prediction. Can be
'auto'
,'numba'
, or'numpy'
. If'auto'
, will use numba if it is installed or numpy otherwise. The numba version is multithreaded and usually faster, which makes fitting and predicting faster.cv (None or crossvalidation generator) – Any scikitlearn crossvalidation generator. If not given, will use the default set by
verde.cross_val_score
.client (None or dask.distributed.Client) – DEPRECATED: This option is deprecated and will be removed in Verde v2.0.0. If None, then computations are run serially. Otherwise, should be a dask
Client
object. It will be used to dispatch computations to the dask cluster.delayed (bool) – If True, will use
dask.delayed
to dispatch computations and allow mod:dask to execute the grid search in parallel (see note above).
 Variables
force_ (array) – The estimated forces that fit the observed data.
force_coords_ (tuple of arrays) – The easting and northing coordinates of the point forces. Same as force_coords if it is not None. Otherwise, same as the data locations used to fit the spline.
region_ (tuple) – The boundaries (
[W, E, S, N]
) of the data used to fit the interpolator. Used as the default region for thegrid
andscatter
methods.scores_ (array) – The mean crossvalidation score for each parameter combination. If
delayed=True
, will be a list ofdask.delayed
objects (see note above).mindist_ (float) – The optimal value for the mindist parameter.
damping_ (float) – The optimal value for the damping parameter.
spline_ (
verde.Spline
) – A fittedSpline
with the optimal configuration parameters.
See also
Spline
The biharmonic spline
cross_val_score
Score an estimator/gridder using crossvalidation
Methods Summary

Filter the data through the gridder and produce residuals. 

Fit the spline to the given data and automatically tune parameters. 

Get parameters for this estimator. 

Interpolate the data onto a regular grid. 

Evaluate the best estimated spline on the given set of points. 

Interpolate data along a profile between two points. 

Interpolate values onto a random scatter of points. 

Score the gridder predictions against the given data. 

Set the parameters of this estimator. 

SplineCV.
filter
(coordinates, data, weights=None)¶ Filter the data through the gridder and produce residuals.
Calls
fit
on the data, evaluates the residuals (data  predicted data), and returns the coordinates, residuals, and weights.No very useful by itself but this interface makes gridders compatible with other processing operations and is used by
verde.Chain
to join them together (for example, so you can fit a spline on the residuals of a trend). Parameters
coordinates (tuple of arrays) – Arrays with the coordinates of each data point. Should be in the following order: (easting, northing, vertical, …). For the specific definition of coordinate systems and what these names mean, see the class docstring.
data (array or tuple of arrays) – The data values of each data point. If the data has more than one component, data must be a tuple of arrays (one for each component).
weights (None or array or tuple of arrays) – If not None, then the weights assigned to each data point. If more than one data component is provided, you must provide a weights array for each data component (if not None).
 Returns
coordinates, residuals, weights – The coordinates and weights are same as the input. Residuals are the input data minus the predicted data.

SplineCV.
fit
(coordinates, data, weights=None)[source]¶ Fit the spline to the given data and automatically tune parameters.
For each combination of the parameters given, computes the mean cross validation score using
verde.cross_val_score
and the given CV splitting class (the cv parameter of this class). The configuration with the best score is then chosen and used to fit the entire dataset.The data region is captured and used as default for the
grid
andscatter
methods.All input arrays must have the same shape.
 Parameters
coordinates (tuple of arrays) – Arrays with the coordinates of each data point. Should be in the following order: (easting, northing, vertical, …). Only easting and northing will be used, all subsequent coordinates will be ignored.
data (array) – The data values of each data point.
weights (None or array) – If not None, then the weights assigned to each data point. Typically, this should be 1 over the data uncertainty squared.
 Returns
self – Returns this estimator instance for chaining operations.

SplineCV.
get_params
(deep=True)¶ Get parameters for this estimator.
 Parameters
deep (boolean, optional) – If True, will return the parameters for this estimator and contained subobjects that are estimators.
 Returns
params (mapping of string to any) – Parameter names mapped to their values.

SplineCV.
grid
(region=None, shape=None, spacing=None, dims=None, data_names=None, projection=None, **kwargs)¶ Interpolate the data onto a regular grid.
The grid can be specified by either the number of points in each dimension (the shape) or by the grid node spacing. See
verde.grid_coordinates
for details. Other arguments forverde.grid_coordinates
can be passed as extra keyword arguments (kwargs
) to this method.If the interpolator collected the input data region, then it will be used if
region=None
. Otherwise, you must specify the grid region.Use the dims and data_names arguments to set custom names for the dimensions and the data field(s) in the output
xarray.Dataset
. Default names will be provided if none are given. Parameters
region (list = [W, E, S, N]) – The west, east, south, and north boundaries of a given region.
shape (tuple = (n_north, n_east) or None) – The number of points in the SouthNorth and WestEast directions, respectively.
spacing (tuple = (s_north, s_east) or None) – The grid spacing in the SouthNorth and WestEast directions, respectively.
dims (list or None) – The names of the northing and easting data dimensions, respectively, in the output grid. Default is determined from the
dims
attribute of the class. Must be defined in the following order: northing dimension, easting dimension. NOTE: This is an exception to the “easting” then “northing” pattern but is required for compatibility with xarray.data_names (list of None) – The name(s) of the data variables in the output grid. Defaults to
['scalars']
for scalar data,['east_component', 'north_component']
for 2D vector data, and['east_component', 'north_component', 'vertical_component']
for 3D vector data.projection (callable or None) – If not None, then should be a callable object
projection(easting, northing) > (proj_easting, proj_northing)
that takes in easting and northing coordinate arrays and returns projected northing and easting coordinate arrays. This function will be used to project the generated grid coordinates before passing them intopredict
. For example, you can use this to generate a geographic grid from a Cartesian gridder.
 Returns
grid (xarray.Dataset) – The interpolated grid. Metadata about the interpolator is written to the
attrs
attribute.
See also
verde.grid_coordinates
Generate the coordinate values for the grid.

SplineCV.
predict
(coordinates)[source]¶ Evaluate the best estimated spline on the given set of points.
Requires a fitted estimator (see
fit
). Parameters
coordinates (tuple of arrays) – Arrays with the coordinates of each data point. Should be in the following order: (easting, northing, vertical, …). Only easting and northing will be used, all subsequent coordinates will be ignored.
 Returns
data (array) – The data values evaluated on the given points.

SplineCV.
profile
(point1, point2, size, dims=None, data_names=None, projection=None, **kwargs)¶ Interpolate data along a profile between two points.
Generates the profile along a straight line assuming Cartesian distances. Point coordinates are generated by
verde.profile_coordinates
. Other arguments for this function can be passed as extra keyword arguments (kwargs
) to this method.Use the dims and data_names arguments to set custom names for the dimensions and the data field(s) in the output
pandas.DataFrame
. Default names are provided.Includes the calculated Cartesian distance from point1 for each data point in the profile.
To specify point1 and point2 in a coordinate system that would require projection to Cartesian (geographic longitude and latitude, for example), use the
projection
argument. With this option, the input points will be projected using the given projection function prior to computations. The generated Cartesian profile coordinates will be projected back to the original coordinate system. Note that the profile points are evenly spaced in projected coordinates, not the original system (e.g., geographic).Warning
The profile calculation method with a projection has changed in Verde 1.4.0. Previous versions generated coordinates (assuming they were Cartesian) and projected them afterwards. This led to “distances” being incorrectly handled and returned in unprojected coordinates. For example, if
projection
is from geographic to Mercator, the distances would be “angles” (incorrectly calculated as if they were Cartesian). After 1.4.0, point1 and point2 are projected prior to generating coordinates for the profile, guaranteeing that distances are properly handled in a Cartesian system. With this change, the profile points are now evenly spaced in projected coordinates and the distances are returned in projected coordinates as well. Parameters
point1 (tuple) – The easting and northing coordinates, respectively, of the first point.
point2 (tuple) – The easting and northing coordinates, respectively, of the second point.
size (int) – The number of points to generate.
dims (list or None) – The names of the northing and easting data dimensions, respectively, in the output dataframe. Default is determined from the
dims
attribute of the class. Must be defined in the following order: northing dimension, easting dimension. NOTE: This is an exception to the “easting” then “northing” pattern but is required for compatibility with xarray.data_names (list of None) – The name(s) of the data variables in the output dataframe. Defaults to
['scalars']
for scalar data,['east_component', 'north_component']
for 2D vector data, and['east_component', 'north_component', 'vertical_component']
for 3D vector data.projection (callable or None) – If not None, then should be a callable object
projection(easting, northing, inverse=False) > (proj_easting, proj_northing)
that takes in easting and northing coordinate arrays and returns projected northing and easting coordinate arrays. Should also take an optional keyword argumentinverse
(default to False) that if True will calculate the inverse transform instead. This function will be used to project the profile end points before generating coordinates and passing them intopredict
. It will also be used to undo the projection of the coordinates before returning the results.
 Returns
table (pandas.DataFrame) – The interpolated values along the profile.

SplineCV.
scatter
(region=None, size=300, random_state=0, dims=None, data_names=None, projection=None, **kwargs)¶ Interpolate values onto a random scatter of points.
Point coordinates are generated by
verde.scatter_points
. Other arguments for this function can be passed as extra keyword arguments (kwargs
) to this method.If the interpolator collected the input data region, then it will be used if
region=None
. Otherwise, you must specify the grid region.Use the dims and data_names arguments to set custom names for the dimensions and the data field(s) in the output
pandas.DataFrame
. Default names are provided. Parameters
region (list = [W, E, S, N]) – The west, east, south, and north boundaries of a given region.
size (int) – The number of points to generate.
random_state (numpy.random.RandomState or an int seed) – A random number generator used to define the state of the random permutations. Use a fixed seed to make sure computations are reproducible. Use
None
to choose a seed automatically (resulting in different numbers with each run).dims (list or None) – The names of the northing and easting data dimensions, respectively, in the output dataframe. Default is determined from the
dims
attribute of the class. Must be defined in the following order: northing dimension, easting dimension. NOTE: This is an exception to the “easting” then “northing” pattern but is required for compatibility with xarray.data_names (list of None) – The name(s) of the data variables in the output dataframe. Defaults to
['scalars']
for scalar data,['east_component', 'north_component']
for 2D vector data, and['east_component', 'north_component', 'vertical_component']
for 3D vector data.projection (callable or None) – If not None, then should be a callable object
projection(easting, northing) > (proj_easting, proj_northing)
that takes in easting and northing coordinate arrays and returns projected northing and easting coordinate arrays. This function will be used to project the generated scatter coordinates before passing them intopredict
. For example, you can use this to generate a geographic scatter from a Cartesian gridder.
 Returns
table (pandas.DataFrame) – The interpolated values on a random set of points.

SplineCV.
score
(coordinates, data, weights=None)¶ Score the gridder predictions against the given data.
Calculates the R^2 coefficient of determination of between the predicted values and the given data values. A maximum score of 1 means a perfect fit. The score can be negative.
If the data has more than 1 component, the scores of each component will be averaged.
 Parameters
coordinates (tuple of arrays) – Arrays with the coordinates of each data point. Should be in the following order: (easting, northing, vertical, …). For the specific definition of coordinate systems and what these names mean, see the class docstring.
data (array or tuple of arrays) – The data values of each data point. If the data has more than one component, data must be a tuple of arrays (one for each component).
weights (None or array or tuple of arrays) – If not None, then the weights assigned to each data point. If more than one data component is provided, you must provide a weights array for each data component (if not None).
 Returns
score (float) – The R^2 score

SplineCV.
set_params
(**params)¶ Set the parameters of this estimator.
The method works on simple estimators as well as on nested objects (such as pipelines). The latter have parameters of the form
<component>__<parameter>
so that it’s possible to update each component of a nested object. Returns
self